Product DescriptionThis listing is for one trailer wheel and tyre.
High OEM quality, as used in our own trailer factory.
10" Steel Wheel, 4" PCD. (See our PCD guide below if you are unsure about this)
Fitted with a 5.0010" 4 Ply Rating Tubeless Tyre. Max load 359kg (718kg per Axle)
PLEASE NOTE; If your trailer was built on second hand mini wheels like many older trailers, then this wheel is the new replacement but it has a different offset to a mini wheel. They will fit the mini hub with no problems but will stick out from the trailer just over an inch more than before. In many cases this is ok but in some cases it is necessary to space the mudguard out for it to fully cover the wheel in order to use these wheels.
Guide to Wheel PCD
To make sure your new wheel will fit your trailer you need to check the stud pattern size and this is known as the PCD. PCD stands for ?pitch circle diameter? and is the diameter of a circle drawn through the centre of all the wheels bolt holes. On a four stud wheel this is very easy to measure, simply by measuring the distance between the centres of two diagonally opposite wheel studs as shown below.
The PCD can be measured in millimetres or in inches. If you have any problems or are not sure please do not hesitate to contact for advice either by eBay message or by telephone on 01782 642122. If you do purchase a wheel and tyre that does not fit your trailer then we are happy to accept a return for exchange or refund as we are on any of our items. The item must be unused and you are responsible for postage costs.